Specifications and Features

 

HyperX Limited Editions – 16GB Kit (4x4GB) – DDR3 2400MHz CL11 Intel XMP DIMM

Stylish. Silver. Solid. Kingston’s HyperX 10th Anniversary Edition memory celebrates ten years of killer performance with a sleek silver heatspreader. Its low profile fits under large CPU coolers; it may be small but its blazing speed leaves the competition behind. This Intel XMP Ready memory boasts higher performing frequencies, timings and voltage that are attainable by simply enabling Intel’s Extreme Memory Profile. It’s covered by a lifetime warranty, free technical support and legendary Kingston® reliability.

FEATURES

  • Capacities 4GB, 8GB, 16GB, 32GB in kits of 2 and 4
  • Frequency speed 1600MHz–2400MHz
  • Compatible tested with all popular brands of motherboards
  • 1.35V-1.65V operating voltage enables stable overclocking
  • Compatible with Intel XMP auto-overclocking function
  • Designed to work with P55, H67, P67, Z68, H61 (AG), X79 and Z77 Intel chipsets; as well as A75, A87, A88, A89, A78, and E35 (Fusion) AMD chipsets
  • 100% factory tested
  • DDR3 only

DESCRIPTION

Kingston’s KHX24C11X3K4/16X is a kit of four 512M x 64-bit (4GB) DDR3-2400 CL11 SDRAM (Synchronous DRAM) 2Rx8 memory modules, based on sixteen 256M x 8-bit DDR3 FBGA components per module. Each module kit supports Intel® XMP (Extreme Memory Profiles). Total kit capacity is 16GB. Each module kit has been tested to run at DDR3-2400 at a low latency timing of 11-13-13 at 1.65V. The SPDs are pro- grammed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers and requires +1.5V. The JEDEC standard electrical and mechanical specifications are as follows:

XMP TIMING PARAMETERS

• JEDEC:DDR3-1333CL9-9-9@1.5V

• XMPProfile#1:DDR3-2400CL11-13-13@1.65V

• XMPProfile#2:DDR3-2133CL11-12-12@1.65V

 

FEATURES

• JEDECstandard1.5V(1.425V~1.575V)PowerSupply • VDDQ=1.5V(1.425V~1.575V) • 667MHzfCKfor1333Mb/sec/pin • 8 independent internal bank

• ProgrammableCASLatency:9,8,7,6 • Posted CAS • ProgrammableAdditiveLatency:0,CL-2,orCL-1clock • Programmable CAS Write Latency(CWL) = 7 (DDR3-1333) • 8-bit pre-fetch

• Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]

• Bi-directional Differential Data Strobe• Internal(self) calibration : Internal self calibration through ZQ

pin (RZQ : 240 ohm ± 1%)

• OnDieTerminationusingODTpin

• AverageRefreshPeriod7.8usatlowerthanTCASE85°C, 3.9us at 85°C < TCASE < 95°C

• Asynchronous Reset • PCB : Height 1.18” (30mm) double sided component

 

SPECIFICATIONS:

CL(IDD): 9 cycles

Row Cycle Time (tRCmin): 49.5ns (min.)

Refresh to Active/Refresh Command Time (tRFCmin) : 160ns (min.)

Row Active Time (tRASmin): 36ns (min.)

Maximum Operating Power: 2.400 W* (per module)

Part Number: KHX24C11X3K4/16X

Specs: DDR3, 2400MHz, CL11, 1.65V, Unbuffered

Profile 1: 2400MHz, 11-13-13, 1.65V
Profile 2: 2133MHz, 11-12-12, 1.65V

Price: $163.99 (from Amazon at time of review)